RPM Nerf Bars, For Traxxas Slash/Slash 4X4, Blue

These are the optional RPM Nerf Bars for the Traxxas Slash and Slash 4x4.

FUNCTIONS:
Composite plastic, blue in color
Safeguards the sides of the chassis from side effects, roll overs and
    T-bone crashes

INCLUDES:
2 RPM Nerf Bars

NEEDS:
Connecting to sides of chassis

SPECIFICATIONS:
Length: 4.5" (114mm)

Frequently gotten with the thing that you are currently reviewing.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

NEEDS:
Installation on front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

REMARKS:
Also offered in Black (RPMC0702)

Get this thing to improve the one you are reading around.



This is the DuraTrax Onyx 245 AC/DC Double Battery charger with LiPo Balancing.
Winner of the 2014 RC Automobile Action Reader's Option Award!

******When charging 2-3 cell LiPo batteries, the Main Charge Lead AND**********
*****the Balance MUST be connected in order for the battery charger to operate.********
*************The Onyx 245 will charge 1S packs normally through****************
***********the primary lead and without the requirement for a balance lead.**************

FUNCTIONS:
Charges 1-3 cell LiPo and LiFe (3.7-11.1V) and 4-8 cell NiCd and
    NiMH batteries
Both outputs work with LiPo, LiFe, NiMH and NiCd
    batteries and the Onyx 245 can charge two batteries of the very same or
    different chemistries at the same time
Each output includes a jack for charging transmitter loads and 4-5
    cell receiver packs
Advanced LCD show with backlight
5 YEAR service warranty through Hobby Services (U.S.A and Canada only)
    starting at date of purchase

INCLUDES:
DuraTrax Onyx 245 AC/DC Double Battery charger with Star Plug, Traxxas
    and Requirement Port Adapters for each output, ElectriFly and
    FlightPower/Thunder Power 6S Balance Boards and Instructions

SPECIFICATIONS:
General Specifications;
    Air Conditioning Input: 110V Air Conditioning 60Hz switching supply with U.S. plug
    DC Input: 11-15V DC, built-in lead with alligator clips
    Protective Gadgets: Solid-state reverse polarity and current
overload
    Measurements: 7.95 x 6.1 x 1.77" (202 x 156 x 45mm)
    Weight: 28.2oz (801g)

Specifications for Each Output;
    Battery Types: 4-8 cell NiMH or NiCd, 1-3 cell LiPo or LiFe
    (3.7-11.1V) loads
    Battery Capability: 100-7500mAh
    Quick Charge Current: 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each
output)
    Quick Charge Termination: Peak detection for NiCd and NiMH,
cc/cv for lithiums
    Quick Charge Safety Timer: 90 minutes
    NiCd/NiMH Peak Sensitivity: 8mV for NiCd; 5mV for NiMH
    NiCd/NiMH Automobile-Trickle Current: Auto (50, 100, 150, 250mA)

Get this thing to improve the one you are reading around.

Blue Front Bumper & Skid Plate For The Traxxas Slash 4X4

This is the optional RPM Front Bumper/Skid Plate for use on the
Traxxas Slash 4x4 Vehicles.

FEATURES:
Nylon construction
Blue in color

INCLUDES:
One Front Bumper
One Skid Plate
One Skid Plate Mount
Seven 4x14mm Flathead Screws
3 3x14mm Buttonhead Screws

NEEDS:
Installation on the automobile