RPM Nerf Bars, For Traxxas Slash/Slash 4X4, Blue

These are the optional RPM Nerf Bars for the Traxxas Slash and Slash 4x4.

FEATURES:
Composite plastic, blue in color
Protects the sides of the chassis from side impacts, roll overs and
    T-bone crashes

INCLUDES:
2 RPM Nerf Bars

REQUIRES:
Connecting to sides of chassis

SPECS:
Length: 4.5" (114mm)

Regularly acquired with the item that you are presently reading about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

REQUIRES:
Setup on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Also readily available in Black (RPMC0702)

Get this item to boost the one you are reading about.



This is the DuraTrax Onyx 245 AC/DC Dual Charger with LiPo Balancing.
Winner of the 2014 RC Car Action Reader's Choice Award!

******When charging 2-3 cell LiPo batteries, the Main Charge Lead AND**********
*****the Balance MUST be linked in order for the charger to operate.********
*************The Onyx 245 will charge 1ST packs typically through****************
***********the primary lead and without the requirement for a balance lead.**************

FEATURES:
Charges 1-3 cell LiPo and LiFe (3.7-11.1V) and 4-8 cell NiCd and
    NiMH batteries
Both outputs are compatible with LiPo, LiFe, NiMH and NiCd
    batteries and the Onyx 245 can charge 2 batteries of the same or
    various chemistries all at once
Each output includes a jack for charging transmitter packs and 4-5
    cell receiver packs
Advanced LCD show with backlight
FIVE YEAR service warranty through Hobby Solutions (U.S.A and Canada only)
    starting at date of purchase

INCLUDES:
DuraTrax Onyx 245 AC/DC Dual Charger with Star Plug, Traxxas
    and Requirement Connector Adapters for each output, ElectriFly and
    FlightPower/Thunder Power 6S Balance Boards and Directions

SPECS:
General Specifications;
    AC Input: 110V AC 60Hz switching supply with U.S. plug
    DC Input: 11-15V DC, integrated lead with alligator clips
    Protective Gadgets: Solid-state reverse polarity and current
overload
    Measurements: 7.95 x 6.1 x 1.77" (202 x 156 x 45mm)
    Weight: 28.2oz (801g)

Specs for Each Output;
    Battery Types: 4-8 cell NiMH or NiCd, 1-3 cell LiPo or LiFe
    (3.7-11.1V) packs
    Battery Capability: 100-7500mAh
    Quick Charge Current: 0.8A, 1.5A, 3A, 5A linear (80W overall, 40W each
output)
    Quick Charge Termination: Peak detection for NiCd and NiMH,
cc/cv for lithiums
    Quick Charge Safety Timer: 90 minutes
    NiCd/NiMH Peak Level of sensitivity: 8mV for NiCd; 5mV for NiMH
    NiCd/NiMH Auto-Trickle Current: Auto (50, 100, 150, 250mA)

Get this item to boost the one you are reading about.

Blue Front Bumper & Skid Plate For The Traxxas Slash 4X4

This is the optional RPM Front Bumper/Skid Plate for usage on the
Traxxas Slash 4x4 Vehicles.

FEATURES:
Nylon building and construction
Blue in color

INCLUDES:
One Front Bumper
One Skid Plate
One Skid Plate Mount
Seven 4x14mm Flathead Screws
Three 3x14mm Buttonhead Screws

REQUIRES:
Setup on the car