RPM Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Housing in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and much better heat dissipation than stock plastic
    motor plate
Motor plate is separate from rear bumper mounts getting rid of damage to
    the plate in the event of a rear collision
Molded nylon gearbox housing with stock bumper installing holes
Separate housing and rear mounts permit transmission upkeep
    without affecting suspension settings
0° and 3° formed rear mounts offer tighter tolerances and less slop
    than machined elements for much better camber and toe angle retention

INCLUDES:
2 Gearbox Real estates, Motor Plate, two 0° and two 3° Back Installs and
    Directions

Right here is a great product that many others have actually purchased the very same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for designs with a slipper clutch.
Black plastic construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This product is often bought with the above discussed product.

Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Outlaw, and Slash.

FEATURES:
Nylon construction
Blue in color
Fits XL-5 and VXL Versions
Maximum Spur Gear (87 Tooth)

INCLUDES:
One Blue Sealed Gear Cover

REQUIRES:
Installation on the above pointed out cars

SPECIFICATIONS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

REMARKS:
Also readily available in Black (RPMC8029)

Get this product to boost the one you are reading about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Sturdy nylon reinforced plastic construction
Uses all stock hardware (for installing shocks etc.)

INCLUDES:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm

This product is often bought with the above discussed product.

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Back Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon construction
Blue in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
4 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
2 RPM Decals

REQUIRES:
Installation on the car
2mm Allen Driver for Installation

This product compliments the main item right here.

Alum Ltwt Beadlock Rings Proline Slash/Slayer

This is the ST Racing Blue Aluminum Lightweight Beadlock Rings
for the ProLine Wheels for the Traxxas Slayer and the Slash 2WD

FEATURES:
Blue in color

INCLUDES:
2 Blue Aluminum Lightweight Beadlock Rings