RPM Heavy Duty Camber Link, For Traxxas E-Rustler & Stampede 2Wd

These are Heavy Task Camber Hyperlinks for the Traxxas Rustler & Stampede.

FEATURES:
One Piece Molded Nylon
Black in Color

INCLUDES:
4 Strong Camber Hyperlinks

NEEDS:
Traxxas Rustler or Stampede

SPECIFICATIONS:
Length: 3.55" (for the (2) longer links)
Width: .320" (for the (2) longer links)
Lenght: 3.062" (for the (2) much shorter links)
Width: .320" (for the (2) much shorter links)

REMARKS:
Factory Number is #81262

Below is one more item that praises the item being talked about.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Construction

INCLUDES:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECIFICATIONS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Density: 2.0 mm (0.082")

REMARKS:
None

This item praises the above talked about item.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic construction, green in color

INCLUDES:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

Below is one more item that praises the item being talked about.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Ideas Polished Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel construction

INCLUDES:
Left and Right King Pins for front suspension

Regularly gotten with the item that you are presently reviewing.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon construction, black in color
Direct fit hop-up requires no model modification for installation

INCLUDES:
2 Front A-Arms

NEEDS:
Installation following the model manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at largest

REMARKS:
For the blue version of this part order RPMC8246

Below is a wonderful item that lots of others have purchased the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Below is one more item that praises the item being talked about.

Alum Front Bulkhead w/Hardware Stampede/Rustler

This is the ST Racing Ideas Aluminum Front Bulkhead
For the Traxxas Electric Stampede, Rustler, Bandit, or Slash 1/10 cars
and Nitro Slash.

FEATURES:
Made from aluminum, anodized silver in color

INCLUDES:
One bulkhead
2 M30x14mm Phillips head screws

SPECIFICATIONS:
Length: 2-7/8" (73mm)
Width: 1-3/32" (281mm)
Height: 1-17/32" (39mm)

REMARKS:
This bulkhead can be set up on
Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede XL-5 2WD RTR w/7C Battery & Battery charger
Traxxas Rustler VXL 2.4GHz RTR
Traxxas Rustler XL-5 2WD RTR
Traxxas Bandit VXL 2.4GHz RTR
Traxxas Bandit Extreme Sports XL-5 RTR
Traxxas Slash 4X4 VXL TQi/2.4GHz RTR
Traxxas Slash 2WD TQi 2.4GHz RTR
Traxxas Slash 4X4 Ultimate VXL TQi RTR
Traxxas Slash F-150 SVT Raptor 2WD TQi
Traxxas Nitro Slash