RPM Heavy Duty Camber Link, For Traxxas E-Rustler & Stampede 2Wd

These are Heavy Responsibility Camber Hyperlinks for the Traxxas Rustler & Stampede.

FEATURES:
One Piece Molded Nylon
Black in Color

SUCHES AS:
Four Heavy Duty Camber Hyperlinks

REQUIRES:
Traxxas Rustler or Stampede

SPECS:
Length: 3.55" (for the (2) longer links)
Width: .320" (for the (2) longer links)
Lenght: 3.062" (for the (2) shorter links)
Width: .320" (for the (2) shorter links)

REMARKS:
Factory Number is #81262

Right here is one more product that compliments the product being discussed.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Construction

SUCHES AS:
One Tie Bar

REQUIRES:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

REMARKS:
None

This product compliments the above discussed product.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic building, green in color

SUCHES AS:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Right here is one more product that compliments the product being discussed.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Ideas Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building

SUCHES AS:
Left and Right King Pins for front suspension

Regularly acquired with the product that you are currently reviewing.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up requires no model modification for installation

SUCHES AS:
2 Front A-Arms

REQUIRES:
Setup following the model handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at best

REMARKS:
For the blue version of this part order RPMC8246

Right here is a fantastic product that lots of others have actually bought at the same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

SUCHES AS:
2 Front bearing (center) providers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Right here is one more product that compliments the product being discussed.



This is the ST Racing Ideas Aluminum Front Bulkhead
For the Traxxas Electric Stampede, Rustler, Bandit, or Slash 1/10 cars
and Nitro Slash.

FEATURES:
Made from aluminum, anodized silver in color

SUCHES AS:
One bulkhead
2 M30x14mm Phillips head screws

SPECS:
Length: 2-7/8" (73mm)
Width: 1-3/32" (281mm)
Height: 1-17/32" (39mm)

REMARKS:
This bulkhead can be installed on
Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede XL-5 2WD RTR w/7C Battery & Battery charger
Traxxas Rustler VXL 2.4GHz RTR
Traxxas Rustler XL-5 2WD RTR
Traxxas Bandit VXL 2.4GHz RTR
Traxxas Bandit Extreme Sports XL-5 RTR
Traxxas Slash 4X4 VXL TQi/2.4GHz RTR
Traxxas Slash 2WD TQi 2.4GHz RTR
Traxxas Slash 4X4 Ultimate VXL TQi RTR
Traxxas Slash F-150 SVT Raptor 2WD TQi
Traxxas Nitro Slash