RPM Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Outlaw, and Slash.

FEATURES:
Nylon building and construction
Blue in color
Fits XL-5 and VXL Versions
Maximum Spur Gear (87 Tooth)

CONSISTS OF:
One Blue Sealed Gear Cover

NEEDS:
Setup on the above discussed cars

SPECS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

REMARKS:
Likewise readily available in Black (RPMC8029)

This thing praises the above talked about thing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural polished color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Want an additional terrific thing to compliment the above discussed thing?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This thing praises the main item below.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Tough nylon enhanced plastic building and construction
Uses all stock hardware (for installing shocks and so on)

CONSISTS OF:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

Want an additional terrific thing to compliment the above discussed thing?

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Back Bumper Mount from RPM for use on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Blue in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
2 RPM Decals

NEEDS:
Setup on the vehicle
2mm Allen Driver for Setup

Frequently bought with the thing that you are presently reading about.

Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Back Bumper for use on the Traxxas Slash.

FEATURES:
Nylon building and construction
Blue in color

CONSISTS OF:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws

NEEDS:
Setup on the vehicle

REMARKS:
Likewise readily available in:
Black (RPMC0080)
Chrome (RPMC0081)

This is a great enhancement to the thing presently being talked about.

Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Real estate in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and much better heat dissipation than stock plastic
    motor plate
Motor plate is separate from rear bumper mounts getting rid of damage to
    the plate in the event of a rear crash
Molded nylon gearbox housing with stock bumper installing holes
Separate housing and rear mounts allow transmission upkeep
    without affecting suspension settings
0° and 3° molded rear mounts offer tighter tolerances and less slop
    than machined elements for much better camber and toe angle retention

CONSISTS OF:
2 Gearbox Real estates, Motor Plate, two 0° and two 3° Back Installs and
    Instructions