RPM Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

COMMENTS:
Also readily available in Blue (RPMC0705)

Below is a fantastic product that numerous others have actually purchased the same time.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, coated
Anodized black with white springs
Totally put together

INCLUDES:
Four completely put together shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the design

This product is regularly bought with the above pointed out product.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

This product is regularly bought with the above pointed out product.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Front driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

This product compliments the above gone over product.

3 X 15Mm Button Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo monster truck, can likewise be used in any
    application where a 3x15mm button head screw is needed

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

You will certainly like this product if you have the product just above discussed.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Resilient steel construction
Silver in color

INCLUDES:
Four 51.5mm pins
Four 30mm pins

REQUIRES:
Setup on the Slash 4x4

Get this product to boost the one you read about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

REQUIRES:
Setup on front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

COMMENTS:
Also readily available in Black (RPMC0702)

This product compliments the main item right here.



Racers Edge 7.4V 25C 5000 Race Battery hardwired W/TRX HC Plug. Racers Edge battery is lighter than standard Ni-Cd or Ni-Mh batteries while providing enhanced performance and run times. It uses the very same balancing connection as Align or Electrifly battery chargers. Make certain to utilize a voltage cut off if your speed control does not come equipped with one. ONLY USAGE A CHARGER SPECIFICALLY FOR Li-Poly cells!!!

Frequently bought with the product that you are currently reviewing.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Compatible with the LGC chassis just**
**will not work with the basic chassis version of the Slash 4x4.**

FEATURES:
Two-piece design enables front end of automobile to be gotten rid of without
    having to eliminate the bellcranks
Side dirt shields mix with the chassis and assistance protect the
    steering servo and bellcrank location from dirt
Constructed of engineering grade nylons, black in color

INCLUDES:
Two-Piece Front Bulkhead with Installing Hardware and Guideline Sheet