RPM Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic building and construction
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Density: .27" (7mm)

This is a fantastic addition to the thing currently being reviewed.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2|2} Front bearing (center) providers
2|2} RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

This is a fantastic addition to the thing currently being reviewed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Durable nylon reinforced plastic building and construction
Utilizes all stock hardware (for mounting shocks and so on)

INCLUDES:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm

You will certainly like this thing if you have the thing earlier mentioned.



This is the ST Racing Solidified Refined Steel Lock-nut Style Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas automobile long enough, you more than likely have
already experienced this issue. ST Racing Ideas Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Set will resolve this issue
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat dealt with for increase in sturdiness, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
2 52mm hinge pins
2 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

Below is a great thing that lots of others have actually purchased the exact same time.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Ideas Refined Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building and construction

INCLUDES:
Left and Right King Pins for front suspension

This thing praises the main item here.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2 rear bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

Want another great thing to compliment the above discussed thing?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up requires no design adjustment for installation

INCLUDES:
2 Front A-Arms

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

REMARKS:
For the blue variation of this part order RPMC8246