RPM Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic building
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

REQUIRES:
Installation on the car

SPECS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Thickness: .27" (7mm)

This is a great enhancement to the item currently being talked about.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2|2} Front bearing (center) providers
2|2} RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

This is a great enhancement to the item currently being talked about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Tough nylon strengthened plastic building
Uses all stock hardware (for mounting shocks and so on)

INCLUDES:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

You will like this product if you have the product above pointed out.



This is the ST Racing Solidified Refined Steel Lock-nut Style Hinge-pin Package
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas car long enough, you more than likely have
already experienced this issue. ST Racing Ideas Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Package will resolve this issue
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for boost in resilience, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
2 52mm hinge pins
2 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

Below is a wonderful item that many others have bought at the same time.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Ideas Refined Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building

INCLUDES:
Left and Right King Pins for front suspension

This item compliments the main item below.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 rear bearing (center) providers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

Want an additional wonderful item to compliment the above pointed out item?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up requires no model adjustment for installation

INCLUDES:
2 Front A-Arms

REQUIRES:
Installation following the model manual

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at largest

COMMENTS:
For the blue version of this part order RPMC8246