RPM Front Right A-Arms, For Summit, Revo & E-Revo, Black

This is a set of RPM Black Front Upper and Lower Right A-Arms
for the Traxxas Revo.

FEATURES:
Constructed of composite nylon
Angled leading and tracking edges eliminate dirt build-up
No excessive A-arm endplay for more accurate caster and toe angle
    settings
Large shock rod mounting locations for enhanced rigidity

CONSISTS OF:
One Front Upper Right and one Front Lower Right A-Arm and one 16mm
    shock mounting screw

REQUIRES:
Setting up on automobile and connecting shock install rod
Checking camber angles with Camber Gauge, RPMC7099

SPECIFICATIONS:
UPPER LOWER
Length: 4.9" (124mm) 5.9" (149mm)
Width: 2.5" (63mm) 2.8" (72mm)

This is a amazing enhancement to the thing presently being talked about.

Summit, Revo & E-Revo Front Left A-Arms-Black

This is a set of optional RPM Front Left A-Arms in Black for the
Traxxas Summit, Revo, and E-Revo.

FEATURES:
Blended engineering grade nylon construction
Redesigned cross brace to clear the T-lock differential on the Summit
Permits complete suspension travel and improves suspension toughness

CONSISTS OF:
Front Upper and Lower Left A-Arms
Direction Sheet

This thing is regularly gotten with the above mentioned thing.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

CONSISTS OF:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Direction sheet

REQUIRES:
Two bundles needed to finish truck

Frequently gotten with the thing that you are presently reading about.

Rubber Exhaust Tip 7Mm

This is the Exhaust Suggestion for the Traxxas Nitro Stampede Beast Truck.
    These Tips are installed on either end of the muffler
to direct the exhaust to the back of the vehicle.

FEATURES:
Constructed of rubber.

INCLUDES:
One Exhaust Suggestion for the Traxxas Nitro Stampede Beast Truck.

REQUIRES:
Putting on end of muffler and protecting with Tie Wrap (TRAC3255) and
Heat Shields (TRAC9449)

SPECIFICATIONS:
Length: 3.07" (78mm)
Diameter where muffler connects: 1" (26mm)

REMARKS:
Two Tips are required per automobile.

Get this thing to improve the one you are reading around.

Rear A-Arms, For Traxxas Revo, Left Or Right, Black

This is a set of RPM Black Rear A-Arms for the Traxxas Revo.

FEATURES:
Constructed of composite nylon
Angled leading and tracking edges eliminate dirt build-up
Fits left or right side

CONSISTS OF:
Two RPM Black Rear A-Arms for the Traxxas Revo with 16mm screw for
    shock install rod

REQUIRES:
Setting up on automobile

SPECIFICATIONS:
Length: 4.9" (124mm)
Width: 2.5" (63mm)

REMARKS:
Two bundles are required per automobile.