RPM Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

REMARKS:
Also available in Blue (RPMC0705)

Here is a terrific product that many others have bought at the same time.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, layered
Anodized black with white springs
Totally assembled

CONSISTS OF:
Four fully assembled shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

This product is frequently acquired with the above mentioned product.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

This product is frequently acquired with the above mentioned product.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Front driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

This product compliments the above talked about product.

3 X 15Mm Button Hex Screw (6)

This is a plan of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo monster truck, can likewise be utilized in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

You will like this product if you have the product earlier stated.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel building
Silver in color

CONSISTS OF:
Four 51.5mm pins
Four 30mm pins

REQUIRES:
Setup on the Slash 4x4

Get this product to boost the one you read about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

REQUIRES:
Setup on front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

REMARKS:
Also available in Black (RPMC0702)

This product compliments the main item below.



Racers Edge 7.4V 25C 5000 Race Battery hardwired W/TRX HC Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while providing improved performance and run times. It utilizes the exact same balancing connection as Align or Electrifly battery chargers. Be sure to utilize a voltage cut off if your speed control does not come geared up with one. ONLY USAGE A BATTERY CHARGER PARTICULARLY FOR Li-Poly cells!!!

Often acquired with the product that you are presently checking out.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Suitable with the LGC chassis only**
**will not work with the standard chassis version of the Slash 4x4.**

FEATURES:
Two-piece design allows front end of automobile to be eliminated without
    needing to eliminate the bellcranks
Side dirt guards blend with the chassis and assistance safeguard the
    guiding servo and bellcrank area from dirt
Constructed of engineering grade nylons, black in color

CONSISTS OF:
Two-Piece Front Bulkhead with Installing Hardware and Instruction Sheet