RPM Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Also offered in Blue (RPMC0705)

Here is a great item that several others have bought at the exact same time.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, coated
Anodized black with white springs
Completely assembled

INCLUDES:
Four completely assembled shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the model

This item is often bought with the above mentioned item.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

This item is often bought with the above mentioned item.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

INCLUDES:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on car

This item praises the above talked about item.

3 X 15Mm Button Hex Screw (6)

This is a package of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Used on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is needed

INCLUDES:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

You will certainly enjoy this thing if you have the thing earlier pointed out.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel building and construction
Silver in color

INCLUDES:
Four 51.5mm pins
Four 30mm pins

NEEDS:
Setup on the Slash 4x4

Get this item to improve the one you are reading around.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

NEEDS:
Setup on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Also offered in Black (RPMC0702)

This item praises the main item right here.



Racers Edge 7.4V 25C 5000 Race Battery hardwired W/TRX HC Plug. Racers Edge battery is lighter than standard Ni-Cd or Ni-Mh batteries while providing improved performance and run times. It utilizes the very same balancing connection as Align or Electrifly battery chargers. Make sure to use a voltage cut off if your speed control doesn't come geared up with one. ONLY USAGE A CHARGER SPECIFICALLY FOR Li-Poly cells!!!

Often bought with the item that you are presently reading about.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Compatible with the LGC chassis just**
**will not work with the basic chassis version of the Slash 4x4.**

FUNCTIONS:
Two-piece design permits front end of car to be removed without
    having to remove the bellcranks
Side dirt guards blend with the chassis and help secure the
    guiding servo and bellcrank area from dirt
Constructed of engineering grade nylons, black in color

INCLUDES:
Two-Piece Front Bulkhead with Installing Hardware and Guideline Sheet