RPM Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

REMARKS:
Likewise available in Blue (RPMC0705)

Right here is a great product that numerous others have actually purchased the same time.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, covered
Anodized black with white springs
Entirely assembled

INCLUDES:
Four totally assembled shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design

This product is regularly gotten with the above mentioned product.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on vehicle

This product is regularly gotten with the above mentioned product.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on vehicle

This product praises the above discussed product.

3 X 15Mm Button Hex Screw (6)

This is a package of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo monster truck, can also be used in any
    application where a 3x15mm button head screw is required

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

You will enjoy this item if you have the item above discussed.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Resilient steel building
Silver in color

INCLUDES:
Four 51.5mm pins
Four 30mm pins

NEEDS:
Setup on the Slash 4x4

Get this product to improve the one you read about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

NEEDS:
Setup on front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

REMARKS:
Likewise available in Black (RPMC0702)

This product praises the main item below.



Racers Edge 7.4V 25C 5000 Race Battery hardwired W/TRX HC Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while providing improved efficiency and run times. It uses the very same balancing connection as Align or Electrifly chargers. Make certain to utilize a voltage cut off if your speed control doesn't come geared up with one. ONLY USE A BATTERY CHARGER PARTICULARLY FOR Li-Poly cells!!!

Often gotten with the product that you are currently checking out.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Suitable with the LGC chassis just**
**will not work with the conventional chassis version of the Slash 4x4.**

FEATURES:
Two-piece design permits front end of vehicle to be gotten rid of without
    needing to remove the bellcranks
Side dirt shields mix with the chassis and assistance protect the
    steering servo and bellcrank area from dirt
Constructed of engineering grade nylons, black in color

INCLUDES:
Two-Piece Front Bulkhead with Installing Hardware and Instruction Sheet