RPM Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend construction, black in color
Locknuts utilized at the chassis and skid plate installing holes to
    safely lock bulkheads in place, reducing the chance of damage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This item is frequently gotten with the above mentioned item.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel construction

CONSISTS OF:
8 pins

NEEDS:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

COMMENTS:
These are enough hinge pins for the whole car.

Numerous others have actually gotten this item in addition to the item that you are presently checking out.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all variations of the Traxxas T-Maxx.
Optional Arms that replace the stock.

FEATURES:
Black in color
Plastic construction

CONSISTS OF:
(1) Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Setup, NOTE-four bundles are required to replace all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Thickness: 0.33" (8.4mm)

This item is frequently gotten with the above mentioned item.

Rear Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Back Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend construction, black in color
Locknuts utilized at the chassis and skid plate installing holes to
    safely lock bulkheads in place, reducing the chance of damage

CONSISTS OF:
One each Left and Right Rear Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This item praises the main item here.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas kits
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
CONSISTS OF: Two notched rings

You will certainly like this product if you have the product above pointed out.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS kits that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FUNCTIONS:
Made from RULON

CONSISTS OF:
Twelve pegs ***Colors may vary from picture***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

COMMENTS:
These pegs go in the holes on the side of the spur gear.

Right here is a wonderful item that many others have actually purchased the same time.

70T Spur Gear 32P

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Hard nylon construction
Drilled for light weight

Specs: Teeth-70
Pitch-32

Needs: Nothing, this is a direct replacement part.

Comments: This is the same gear that comes in the truck kit.

2/10/97
AST