RPM Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate installing holes to
    safely lock bulkheads in location, decreasing the chance of damage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

This product is regularly acquired with the above mentioned product.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building

CONSISTS OF:
8 pins

REQUIRES:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

REMARKS:
These suffice hinge pins for the whole vehicle.

Several others have actually acquired this product in addition to the product that you are currently reading about.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all variations of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic building

CONSISTS OF:
(1) Arm
(1) Lower Arm
(2) RPM Decals

REQUIRES:
Installation, NOTE-four packages are needed to change all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Thickness: 0.33" (8.4mm)

This product is regularly acquired with the above mentioned product.

Rear Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Rear Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate installing holes to
    safely lock bulkheads in location, decreasing the chance of damage

CONSISTS OF:
One each Left and Right Rear Bulkhead
8 M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

This product praises the main item below.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas packages
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential equipment or the spur gear.

PACKAGE
CONSISTS OF: 2 notched rings

You will enjoy this item if you have the item just above discussed.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS packages that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FUNCTIONS:
Made of RULON

CONSISTS OF:
Twelve pegs ***Colors may differ from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur equipment.

Right here is a terrific product that several others have actually purchased the same time.

70T Spur Gear 32P

This is the spur equipment (or main equipment) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth equipment

Features: Hard nylon building
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Needs: Nothing, this is a direct replacement part.

Comments: This is the exact same equipment that can be found in the truck kit.

2/10/97
AST