RPM Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building and construction, black in color
Locknuts utilized at the chassis and skid plate installing holes to
    firmly lock bulkheads in place, lowering the chance of damage

SUCHES AS:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This thing is often acquired with the above discussed thing.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel building and construction

SUCHES AS:
Eight pins

REQUIRES:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

REMARKS:
These suffice hinge pins for the entire automobile.

Several others have acquired this thing along with the thing that you are presently reading about.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic building and construction

SUCHES AS:
(1) Upper Arm
(1) Lower Arm
(2) RPM Decals

REQUIRES:
Setup, NOTE-four packages are required to change all A-arms

SPECS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

This thing is often acquired with the above discussed thing.

Rear Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Back Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building and construction, black in color
Locknuts utilized at the chassis and skid plate installing holes to
    firmly lock bulkheads in place, lowering the chance of damage

SUCHES AS:
One each Left and Right Rear Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This thing praises the main item right here.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas packages
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential equipment or the spur gear.

PACKAGE
SUCHES AS: 2 notched rings

You will certainly like this item if you have the item previously stated.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS packages that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FEATURES:
Made of RULON

SUCHES AS:
Twelve pegs ***Colors might differ from picture***

SPECS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur equipment.

Here is a great thing that lots of others have bought at the very same time.

70T Spur Gear 32P

This is the spur equipment (or main equipment) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth equipment

Features: Hard nylon building and construction
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Requires: Nothing, this is a direct replacement part.

Comments: This is the exact same equipment that comes in the truck set.

2/10/97
AST