RPM Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all versions of the T-Maxx and E-Maxx
Nylon mix building and construction, black in color
Locknuts used at the chassis and skid plate installing holes to
    firmly lock bulkheads in place, reducing the chance of breakage

SUCHES AS:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This product is frequently purchased with the above pointed out product.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel building and construction

SUCHES AS:
8 pins

NEEDS:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

COMMENTS:
These are enough hinge pins for the entire automobile.

Many others have purchased this product along with the product that you are currently reading about.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic building and construction

SUCHES AS:
(1) Upper Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Installation, NOTE-four bundles are needed to change all A-arms

SPECS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

This product is frequently purchased with the above pointed out product.

Rear Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Rear Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all versions of the T-Maxx and E-Maxx
Nylon mix building and construction, black in color
Locknuts used at the chassis and skid plate installing holes to
    firmly lock bulkheads in place, reducing the chance of breakage

SUCHES AS:
One each Left and Right Rear Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This product praises the main item right here.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
SUCHES AS: 2 notched rings

You will certainly enjoy this product if you have the product above mentioned.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FUNCTIONS:
Made of RULON

SUCHES AS:
Twelve pegs ***Colors might differ from photo***

SPECS:
length - 3.5mm
diameter - 3mm

COMMENTS:
These pegs enter the holes on the side of the spur gear.

Right here is a fantastic product that lots of others have purchased the very same time.

70T Spur Gear 32P

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Hard nylon building and construction
Drilled for lightweight

Specifications: Teeth-70
Pitch-32

Needs: Absolutely nothing, this is a direct replacement part.

Comments: This is the same gear that comes in the truck kit.

2/10/97
AST