RPM Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate installing holes to
    safely lock bulkheads in restaurant, minimizing the possibility of damage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

This thing is regularly gotten with the above mentioned thing.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Durable steel building

INCLUDES:
Eight pins

NEEDS:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

COMMENTS:
These are enough hinge pins for the entire vehicle.

Many others have gotten this thing together with the thing that you are currently reading about.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic building

INCLUDES:
(1) Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Setup, NOTE-four bundles are needed to change all A-arms

SPECS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

This thing is regularly gotten with the above mentioned thing.

Rear Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Rear Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building, black in color
Locknuts used at the chassis and skid plate installing holes to
    safely lock bulkheads in restaurant, minimizing the possibility of damage

INCLUDES:
One each Left and Right Rear Bulkhead
Eight M3 Locknuts
Four M3 x 20mm Flathead Screws
Four M3 x 22mm Flathead Screws

This thing compliments the main item here.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential equipment or the spur gear.

PACKAGE
INCLUDES: Two notched rings

You will love this item if you have the item earlier mentioned.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FEATURES:
Made of RULON

INCLUDES:
Twelve pegs ***Colors might vary from picture***

SPECS:
length - 3.5mm
size - 3mm

COMMENTS:
These pegs enter the holes on the side of the spur equipment.

Here is a excellent thing that numerous others have purchased the same time.

70T Spur Gear 32P

This is the spur equipment (or main equipment) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth equipment

Functions: Hard nylon building
Drilled for lightweight

Specifications: Teeth-70
Pitch-32

Requires: Absolutely nothing, this is a direct replacement part.

Comments: This is the exact same equipment that is available in the truck package.

2/10/97
AST