RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Heavy Duty Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon building, red in color
Almost 25% lighter than stock versions
Increased clearance locations in the external part enables increased
    droop travel when utilized with RPM #80372 and #80382 large
    bearing providers

CONSISTS OF:
Two Heavy Duty Front-A Arms in Red

Below is a terrific product that several others have purchased the exact same time.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Heavy Duty Rear A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Eliminates over 0.03" (0.8mm) of slop from the inner arm mount
Nylon mix building, red in color

CONSISTS OF:
Left and Right Rear A-Arms

This product is frequently bought with the above pointed out product.

Rear A-Arms, For Traxxas Slash 2Wd, Red

These are the optional RPM Heavy Duty Rear A-Arms in Red
for the Traxxas 2WD Electric Slash.
**Will not fit the Nitro Slash, or other Traxxas vehicles.**

FUNCTIONS:
10% lighter than the original arms
Product around inner and external hinge pins was increased by 64%
    for higher resilience
Eliminates most slop in rear suspension
New design does not permit dirt to obtain caught in lower A-arm
Nylon mix building, red in color

CONSISTS OF:
Left and Right Rear A-Arms

Lots of others have bought this product together with the product that you are presently reading about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Includes additional 1/2" (13mm) defense to front end
Nylon mix building, red in color

CONSISTS OF:
Wide Front Bumper

SPECS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from back of mounting area to outdoors edge

Below is a terrific product that several others have purchased the exact same time.

Heavy Duty Camber Link, For Traxxas E-Rustler & Stampede 2Wd, Re

These are the optional RPM Heavy Duty Camber Hyperlinks in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Developed for the electrical Rustler and Stampede that include stock
    molded camber links
Nylon mix building, red in color

CONSISTS OF:
Two Front and two Rear Hyperlinks

You will enjoy this product if you have the product above stated.

Aluminum Oversized Front Knuckles W/Bearings, Red, For Traxxas S

These are the Red Aluminum Front Knuckles from ST Racing
    for the Traxxas Slash 2WD, Stampede, Rustler, Bandit
and Nitro Slash (TRAD77**).

FUNCTIONS:
Red in color

CONSISTS OF:
Two Red Aluminum Front Knuckles
Four Ball Bearings

This product compliments the above discussed product.



This is the ST Racing Red Aluminum Rear Center Carrier
for the Traxxas Slash, Stampede, Rustler and Bandit.

FEATURES:
Red in color

CONSISTS OF:
Two Red Aluminum Rear Center Carriers

This product compliments the above discussed product.

Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

CONSISTS OF:
Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

This is a superb addition to the product presently being discussed.