RPM Front Right A-Arms, For Summit, Revo & E-Revo, Blue

This is a pair of RPM Blue Front Upper and Lower Right A-Arms
for the Traxxas Revo.

FEATURES:
Constructed of composite nylon
Angled leading and tracking edges remove dirt accumulation
No extreme A-arm endplay for more precise caster and toe angle
    settings
Large shock rod mounting locations for improved rigidity

CONSISTS OF:
One Front Upper Right and one Front Lower Right A-Arm and one 16mm
    shock mounting screw

REQUIRES:
Installing on vehicle and attaching shock mount rod
Checking camber angles with Camber Gauge, RPMC7099

SPECS:
UPPER LOWER
Length: 4.9" (124mm) 5.9" (149mm)
Width: 2.5" (63mm) 2.8" (72mm)

REMARKS:
For Upper and Lower Left A-Arms order RPMC8226.

This product praises the above gone over product.

Summit, Revo & E-Revo Front Left A-Arms-Blue

This is a pair of optional RPM Front Left A-Arms in Blue for the
Traxxas Summit, Revo, and E-Revo.

FEATURES:
Mixed engineering grade nylon construction
Upgraded cross brace to clear the T-lock differential on the Summit
Enables complete suspension travel and improves suspension durability

CONSISTS OF:
Front Upper and Lower Left A-Arms
Instruction Sheet

The listed below product likewise pairs actually well with the product being gone over.

Revo True-Track Rear A-Arm Conversion Kit-Blue

This is the RPM True-Track Back A-Arm Conversion in Blue
for all versions of the Traxxas Revo.

FEATURES:
Eliminates stock rear toe links, locking in the rear toe angle at
    1.5° per side for a total rear toe-in angle of 3°
Eliminates all rear bump steer for much better rear end tracking
    regardless of surface
Replaces lower pivot ball with a 4mm size hinge pin for continuous
    rear toe angle
Retains stock upper pivot ball to permit camber adjustments
Weighs a overall of 1-1/8oz (32g) less than stock components

CONSISTS OF:
Two each Upper and Lower Back A-Arms
Two Axle Carriers
Two 4mm Hinge Pins
4 E-Clips
Two 3x16mm Shock Mount Screws
Two Aluminum Pivot Ball Set Screws
Two Delrin Pivot Ball Bushing Cups
Two 6x15mm Sealed Outer Bearings
Two 12x21mm Sealed Inner Bearings
Instruction sheet

REQUIRES:
Removing stock rear components

REMARKS:
This True-Track system works with the following RPM
    components;
    RPMC8237 Front Black A-Arms
    RPMC8238 Front Blue A-Arms
    RPMC8222 Black Front Upper and Lower Left A-Arms
    RPMC8585 RPM Axle Carriers/Steering Blocks

Not compatible with the Traxxas #5356 Long Travel Rocker Set.