RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Heavy Duty Front-A Arms in Green
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, green in color
Almost 25% lighter than stock variations
Increased clearance locations in the outer part allows increased
    droop travel when utilized with RPM #80372 and #80382 oversized
    bearing carriers

INCLUDES:
Two Heavy Duty Front-A Arms in Green

This product praises the above reviewed product.

Rear A-Arms, For Traxxas Elecric Stampede 2Wd And Rustler

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These install to the bulkhead and the hubs install to it.

FEATURES:
Heavy Duty Nylon Building and construction
Green in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

INCLUDES:
Two Rear Green A-Arms
One RPM Decal Sheet w/ Two RPM Brandings

REQUIRES:
Assembly onto Car

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Hub: 1.11" (28.25mm)
Density: .31" (7.8mm)

Many others have acquired this product along with the product that you are currently reviewing.

Rear A-Arms, For Traxxas Slash 2Wd, Green

This is a pair of optional RPM Rear A-Arms
for the 1/10 scale Traxxas Slash 2WD.

FEATURES:
Composite plastic construction, green in color

INCLUDES:
Left and Right Rear A-Arm

Many others have acquired this product along with the product that you are currently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated guarantee appropriate setup

INCLUDES:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and steering knuckles

Frequently acquired with the product that you are currently reviewing.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic construction, green in color

INCLUDES:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

Below is a terrific product that numerous others have bought at the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two Front bearing (center) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

This product praises the above reviewed product.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a pair of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel construction

INCLUDES:
Two Rear Driveshafts

This product praises the main item below.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Designed for models with a slipper clutch.
Black plastic construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).