RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Strong Front-A Arms in Green
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon building and construction, green in color
Almost 25% lighter than stock versions
Increased clearance areas in the outer portion permits increased
    droop travel when utilized with RPM #80372 and #80382 large
    bearing providers

CONSISTS OF:
2 Strong Front-A Arms in Green

This item praises the above discussed item.

Rear A-Arms, For Traxxas Elecric Stampede 2Wd And Rustler

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These install to the bulkhead and the hubs install to it.

FEATURES:
Strong Nylon Construction
Green in Color
Pre-Drilled Shock Installing Positions
For the Rear of the Electric Rustler and Electric Stampede

CONSISTS OF:
2 Rear Green A-Arms
One RPM Decal Sheet w/ 2 RPM Logos

NEEDS:
Assembly onto Automobile

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Hub: 1.11" (28.25mm)
Density: .31" (7.8mm)

Several others have purchased this item along with the item that you are presently reading about.

Rear A-Arms, For Traxxas Slash 2Wd, Green

This is a pair of optional RPM Rear A-Arms
for the 1/10 scale Traxxas Slash 2WD.

FUNCTIONS:
Composite plastic building and construction, green in color

CONSISTS OF:
Left and Right Rear A-Arm

Several others have purchased this item along with the item that you are presently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to guarantee correct setup

CONSISTS OF:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and steering knuckles

Regularly purchased with the item that you are presently reading about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building and construction, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

Below is a terrific item that several others have purchased the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

This item praises the above discussed item.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a pair of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building and construction

CONSISTS OF:
2 Rear Driveshafts

This item praises the main item right here.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Designed for models with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).