RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon construction, black in color
Direct fit hop-up needs no design modification for setup

INCLUDES:
Two Front A-Arms

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at largest

COMMENTS:
For the blue version of this part order RPMC8246

Want another fantastic thing to compliment the above discussed thing?

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Sturdy Rear A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon construction
Black in color
Very durable

INCLUDES:
Two Sturdy Rear A-Arms

NEEDS:
Setup on the car

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

COMMENTS:
Also available in Blue RPMC8472

This thing is often purchased with the above discussed thing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two Front bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Want another fantastic thing to compliment the above discussed thing?



This is the ST Racing Hardened Refined Steel Lock-nut Design Hinge-pin Package
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas car enough time, you probably have
already experienced this problem. ST Racing Concepts Heat Treated
Refined Steel Lock-Nut Design Hinge-Pin Package will resolve this problem
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat dealt with for boost in resilience, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

This thing compliments the main item below.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two rear bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

This thing compliments the main item below.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Black

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These install to the bulkhead and the centers install to it.

FEATURES:
Sturdy Nylon Building and construction
Black in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

INCLUDES:
Two Rear Black A-Arms
One RPM Decal Sheet w/ Two RPM Logos

NEEDS:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Density: .31" (7.8mm)