RPM Black Esc Cage For Castle Sidewinder 3 & Sidewinder Sct Escs

This is the RPM ESC Cage for Castle Sidewinder 3
and Sidewinder SCT Electronic Speed Controls.

FEATURES:
Constructed of engineering grade nylon, black in color
Fits the following Castle Creations ESCs;
    010-0115-00, 010-0115-01, 010-0115-02, 010-0115-03, 010-0115-04
    010-0123-00
Permits ESC to be run with or without a fan
Fastens to chassis with two screws, entire assembly can be transfered
    from one vehicle to the next in about a minute
Different switch install bolts to cage, or may be installed anywhere by
    two 2mm holes
Fits the following Traxxas automobiles;
    Slash 2WD
    Slash 2wd LCG
    Slash 4×4,
    Slash 4×4 LCG
    Stampede 4x4
    Rally
Fits the following Traxxas automobiles when the Traxxas #3725 Installing
    Plate is utilized;
    Rustler XL-5
    Stampede XL-5
    Bandit XL-5

INCLUDES:
Unassembled ESC Cage with Hardware and Guideline Sheet
Different On/Off Switch Mount

This is a wonderful enhancement to the product presently being gone over.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to connect backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Secure favorable locking spring loaded terminals for constant
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
Two black male plastic adapters
Two sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins

Regularly gotten with the product that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in much heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows ability through Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for use in almost every environment (not meant for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" size slotted stator
Removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery connector of modeler's option

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)