RPM Black Esc Cage For Castle Sidewinder 3 & Sidewinder Sct Escs

This is the RPM ESC Cage for Castle Sidewinder 3
and Sidewinder SCT Electronic Speed Controls.

FEATURES:
Constructed of engineering grade nylon, black in color
Fits the following Castle Creations ESCs;
    010-0115-00, 010-0115-01, 010-0115-02, 010-0115-03, 010-0115-04
    010-0123-00
Permits ESC to be kept up or without a fan
Fastens to chassis with 2 screws, whole assembly can be moved
    from one vehicle to the next in about a minute
Different switch mount bolts to cage, or might be mounted anywhere by
    2 2mm holes
Fits the following Traxxas cars;
    Slash 2WD
    Slash 2wd LCG
    Slash 4×4,
    Slash 4×4 LCG
    Stampede 4x4
    Rally
Fits the following Traxxas cars when the Traxxas #3725 Mounting
    Plate is utilized;
    Rustler XL-5
    Stampede XL-5
    Outlaw XL-5

CONSISTS OF:
Unassembled ESC Cage with Hardware and Instruction Sheet
Different On/Off Switch Mount

This is a amazing enhancement to the product presently being gone over.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to connect backwards
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Safe and secure positive locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
2 black male plastic connectors
2 sets of gold metal pins
Instruction sheet

REQUIRES:
Soldering wires to the metal pins

Often acquired with the product that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB programs capability through Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for use in almost every environment (not meant for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" size slotted stator
Removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's choice

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)