RPM Caster Blocks & Spindle Blocks For The Slash 4X4, Stampede 4X4,

These are the optional RPM Caster and Steering Blocks for all versions of the
Traxxas Slash 4x4, Stampede 4x4 and the 1/10 scale Rally 4WD.

FEATURES:
Plastic building

INCLUDES:
2 Caster Blocks and two Guiding Blocks

Numerous others have acquired this thing in addition to the thing that you are presently checking out.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Rear Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building
Black in color

INCLUDES:
2 Rear Bearing Carriers
Decal

REQUIRES:
2 5x11x4mm ball bearings, DTXC1547

Numerous others have acquired this thing in addition to the thing that you are presently checking out.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Red

These are the optional RPM Sturdy Front or Rear A-Arms in Red
for the Traxxas Slash 4x4, and Stampede 4x4.

FEATURES:
Each A-arm is 0.22oz (6.5g) lighter than stock A-arm
Eliminates slop in suspension and tightens up tolerances around hinge
    pins
Lowered fore and aft movement at inner hinge pin and axle providers
    by greater than 90%
Nylon blend building, red in color

INCLUDES:
Left and Right Front or Rear A-Arms (two bundles required to
    total one truck

This is a superb addition to the thing presently being reviewed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building

INCLUDES:
One slipper pressure plate
One slipper hub

REQUIRES:
Installation onto car.

Right here is another thing that praises the thing being reviewed.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Elements for both nitro and electric Revo and Maxx trucks

INCLUDES:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

This is a superb addition to the thing presently being reviewed.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Front driveshaft assembly
Screw pin

REQUIRES:
Installation on car

Right here is a great thing that lots of others have bought at the exact same time.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

INCLUDES:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Remaining clutch pieces

This thing praises the above reviewed thing.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

REMARKS:
Also available in Blue (RPMC0705)