RPM Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is what the
guiding knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to guarantee appropriate setup

CONSISTS OF:
2|2} RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and guiding knuckles

Regularly acquired with the item that you are presently reviewing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
2|2} Front bearing (hub) providers
2|2} RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Want one more great item to compliment the above discussed item?

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Concepts Polished Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building and construction

CONSISTS OF:
Left and Right King Pins for front suspension

Want one more great item to compliment the above discussed item?

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
2|2} rear bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

Right here is a great item that many others have purchased the exact same time.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Right here is a great item that many others have purchased the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item is often acquired with the above discussed item.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Durable Plastic Building
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

NEEDS:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

The listed below item also pairs actually well with the item being discussed.



This is the ST Racing Solidified Polished Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas automobile enough time, you most likely have
currently experienced this problem. ST Racing Concepts Heat Treated
Polished Steel Lock-Nut Style Hinge-Pin Kit will resolve this problem
at last. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat dealt with for increase in sturdiness, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts