RPM Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Blue Wide Front Bumper
for the Traxxas Rustler, Stampede and Bandit.
The Bumper goes on the Front of the Automobile and Safeguards the Chassis.

FEATURES:
Durable plastic building and construction
Fits both nitro and electric versions of the Rustler and Stampede

SUCHES AS:
One Bumper
One Group RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler, Stampede or Outlaw

SPECIFICATIONS:
Length: 2-3/4" (70mm)
Width: 6-1/4" (159mm)

Many others have gotten this thing in addition to the thing that you are currently checking out.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at back of chassis to prevent automobile from turning over
    during wheelies

SUCHES AS:
Put together optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Fastening to back of chassis

Want another wonderful thing to match the above pointed out thing?

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic building and construction, green in color

SUCHES AS:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Many others have gotten this thing in addition to the thing that you are currently checking out.

Large Servo Saver

This is a large servo saver that can be utilized in Traxxas automobiles or any vehicle that
needs a large style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that enable you to mount the saver
on most popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the steering linkages.

Below is a wonderful thing that several others have bought at the exact same time.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in many Traxxas vehicles.
The front suspension arm hinge pins pass through this piece.

FEATURES:
Gray nylon building and construction

SUCHES AS:
One front bulkhead

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

COMMENTS:
This part is utilized on the list below vehicles:
    Rustler, Outlaw, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

The below thing likewise pairs actually well with the thing being talked about.

Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, neon green in color
Installs at back of chassis to prevent automobile from turning over
    during wheelies

SUCHES AS:
Put together optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Fastening to back of chassis

This thing compliments the above talked about thing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
steering knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to guarantee proper installation

SUCHES AS:
2 RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and steering knuckles