RPM Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Real estate in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and better heat dissipation than stock plastic
    motor plate
Motor plate is different from rear bumper mounts removing damage to
    the plate in case of a rear crash
Formed nylon gearbox housing with stock bumper mounting holes
Different housing and rear mounts enable transmission maintenance
    without affecting suspension settings
0° and 3° formed rear mounts offer tighter tolerances and less slop
    than machined elements for better camber and toe angle retention

INCLUDES:
2 Gearbox Housings, Motor Plate, 2 0° and 2 3° Back Mounts and
    Guidelines

Here is a excellent thing that many others have bought at the very same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for models with a slipper clutch.
Black plastic construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This thing is regularly purchased with the above stated thing.

Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Outlaw, and Slash.

FEATURES:
Nylon construction
Blue in color
Fits XL-5 and VXL Versions
Maximum Spur Gear (87 Tooth)

INCLUDES:
One Blue Sealed Gear Cover

NEEDS:
Setup on the above pointed out automobiles

SPECIFICATIONS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

REMARKS:
Likewise available in Black (RPMC8029)

Get this thing to enhance the one you are reading about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Strong nylon reinforced plastic construction
Utilizes all stock hardware (for mounting shocks and so on)

INCLUDES:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

This thing is regularly purchased with the above stated thing.

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Back Bumper Mount from RPM for use on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon construction
Blue in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
2 RPM Decals

NEEDS:
Setup on the vehicle
2mm Allen Motorist for Setup

This thing compliments the main item right here.

Alum Ltwt Beadlock Rings Proline Slash/Slayer

This is the ST Racing Blue Aluminum Light Weight Beadlock Rings
for the ProLine Wheels for the Traxxas Slayer and the Slash 2WD

FUNCTIONS:
Blue in color

INCLUDES:
2 Blue Aluminum Light Weight Beadlock Rings