RPM Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Housing in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and better heat dissipation than stock plastic
    motor plate
Motor plate is separate from rear bumper installs getting rid of damage to
    the plate in case of a rear accident
Molded nylon gearbox real estate with stock bumper mounting holes
Separate real estate and rear installs enable transmission upkeep
    without affecting suspension settings
0° and 3° formed rear installs offer tighter tolerances and less slop
    than machined elements for better camber and toe angle retention

CONSISTS OF:
2 Gearbox Real estates, Motor Plate, 2 0° and 2 3° Rear Installs and
    Instructions

Below is a excellent product that numerous others have actually purchased the very same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for designs with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This product is regularly gotten with the above stated product.

Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Outlaw, and Slash.

FEATURES:
Nylon building and construction
Blue in color
Fits XL-5 and VXL Versions
Maximum Spur Gear (87 Tooth)

CONSISTS OF:
One Blue Sealed Gear Cover

NEEDS:
Installation on the above pointed out vehicles

SPECS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

COMMENTS:
Likewise readily available in Black (RPMC8029)

Get this product to enhance the one you read about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Sturdy nylon reinforced plastic building and construction
Uses all stock hardware (for mounting shocks and so on)

CONSISTS OF:
One rear shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

This product is regularly gotten with the above stated product.

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Rear Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Blue in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
2 RPM Decals

NEEDS:
Installation on the car
2mm Allen Motorist for Installation

This product praises the main item here.

Alum Ltwt Beadlock Rings Proline Slash/Slayer

This is the ST Racing Blue Aluminum Lightweight Beadlock Rings
for the ProLine Wheels for the Traxxas Slayer and the Slash 2WD

FUNCTIONS:
Blue in color

CONSISTS OF:
2 Blue Aluminum Lightweight Beadlock Rings