RPM Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Real estate in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and better heat dissipation than stock plastic
    motor plate
Motor plate is separate from rear bumper installs eliminating damage to
    the plate in the event of a rear accident
Formed nylon gearbox real estate with stock bumper mounting holes
Different real estate and rear installs allow transmission upkeep
    without impacting suspension settings
0° and 3° formed rear installs offer tighter tolerances and less slop
    than machined parts for better camber and toe angle retention

INCLUDES:
2 Gearbox Housings, Motor Plate, 2 0° and 2 3° Back Installs and
    Guidelines

Below is a fantastic thing that numerous others have purchased the exact same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This thing is frequently gotten with the above mentioned thing.

Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Bandit, and Slash.

FEATURES:
Nylon building and construction
Blue in color
Fits XL-5 and VXL Versions
Maximum Spur Gear (87 Tooth)

INCLUDES:
One Blue Sealed Gear Cover

REQUIRES:
Installation on the above discussed cars

SPECIFICATIONS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

REMARKS:
Also offered in Black (RPMC8029)

Get this thing to enhance the one you read around.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Tough nylon enhanced plastic building and construction
Utilizes all stock hardware (for mounting shocks and so on)

INCLUDES:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm

This thing is frequently gotten with the above mentioned thing.

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Back Bumper Mount from RPM for use on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Blue in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
4 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
2 RPM Decals

REQUIRES:
Installation on the car
2mm Allen Motorist for Installation

This thing praises the main item here.

Alum Ltwt Beadlock Rings Proline Slash/Slayer

This is the ST Racing Blue Aluminum Lightweight Beadlock Rings
for the ProLine Wheels for the Traxxas Slayer and the Slash 2WD

FEATURES:
Blue in color

INCLUDES:
2 Blue Aluminum Lightweight Beadlock Rings