RPM Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
Two Front bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Frequently acquired with the item that you are currently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and left to insure appropriate installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles

Here is a excellent item that several others have actually bought at the same time.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Principles Refined Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel construction

CONSISTS OF:
Left and Right King Pins for front suspension

This item praises the above reviewed item.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
Two rear bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

This item praises the main item here.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the main item here.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Sturdy Back A-Arms for the
2WD Traxxas Slash Short Course Racing Truck.

FEATURES:
Nylon construction
Black in color
Very resilient

CONSISTS OF:
Two Heavy Duty Back A-Arms

REQUIRES:
Installation on the car

SPECS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Likewise offered in Blue RPMC8472

This item praises the above reviewed item.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

The listed below item likewise pairs actually well with the item being reviewed.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

REQUIRES:
Installation on the car

SPECS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Density: .27" (7mm)