RPM A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic building and construction

CONSISTS OF:
(1) Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Setup, NOTE-four bundles are required to change all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Thickness: 0.33" (8.4mm)

Want another great product to compliment the above discussed product?

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend building and construction, black in color
Locknuts used at the chassis and skid plate installing holes to
    securely lock bulkheads in location, decreasing the chance of breakage

CONSISTS OF:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

Get this product to improve the one you read about.

Ultra Shocks Xxl Grey (2)

This is a set of the Ultra Shocks for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Gray composite bodies
Stock replacement T-Maxx 3.3 unassembled shocks
Preload spacers and 2 red springs

CONSISTS OF:
Two Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of silicone
    oil and assembly diagram

NEEDS:
Assembly

COMMENTS:
Two sets are required if replacing all shocks.
Progressive Rate White Springs are also offered, TRAC9557.