RPM A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all variations of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic construction

CONSISTS OF:
(1) Arm
(1) Lower Arm
(2) RPM Decals

REQUIRES:
Installation, NOTE-four bundles are required to change all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

Want one more wonderful thing to enhance the above pointed out thing?

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend construction, black in color
Locknuts used at the chassis and skid plate mounting holes to
    securely lock bulkheads in place, reducing the chance of breakage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

Get this thing to boost the one you are reading about.

Ultra Shocks Xxl Grey (2)

This is a set of the Ultra Shocks for the Traxxas T-Maxx 3.3.

FEATURES:
Gray composite bodies
Stock replacement T-Maxx 3.3 unassembled shocks
Preload spacers and two red springs

CONSISTS OF:
2 Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of silicone
    oil and assembly diagram

REQUIRES:
Assembly

COMMENTS:
2 sets are required if replacing all shocks.
Progressive Rate White Springs are likewise readily available, TRAC9557.