RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, blue in color
Direct fit hop-up requires no model adjustment for installation

CONSISTS OF:
Two Front A-Arms

NEEDS:
Installation following the model handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowest 1.52" (38.5mm) at largest

COMMENTS:
For the black version of this part order RPMC8245

This is a superb enhancement to the thing presently being reviewed.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Blue

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the hubs mount to it.

FEATURES:
Sturdy Nylon Building and construction
Blue in Color
Pre-Drilled Shock Installing Positions
For the Back of the Electric Rustler and Electric Stampede

CONSISTS OF:
Two Back Blue A-Arms
One RPM Decal Sheet w/ Two RPM Brandings

NEEDS:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Hub: 1.11" (28.25mm)
Thickness: .31" (7.8mm)

This thing praises the main item here.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (center) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Regularly acquired with the thing that you are presently reading about.



This is the ST Racing Hardened Polished Steel Lock-nut Design Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas car long enough, you most likely have
currently experienced this problem. ST Racing Principles Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Kit will solve this problem
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat dealt with for increase in resilience, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

Regularly acquired with the thing that you are presently reading about.

Skid Plates, Front & Rear (Blue)

These are optional Front and Rear Skid Plates in Blue for the
Traxxas Electric Stampede.

FEATURES:
Constructed of plastic, blue in color
Changes stock black skid plates

CONSISTS OF:
Front and Back Blue Skid Plates

This thing praises the above reviewed thing.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at back of chassis to prevent car from turning over
    throughout wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with mounting guidelines and
    hardware

NEEDS:
Securing to back of chassis