RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, blue in color
Direct fit hop-up needs no model modification for installation

INCLUDES:
2|2} Front A-Arms

REQUIRES:
Installation following the model handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowest 1.52" (38.5mm) at largest

COMMENTS:
For the black variation of this part order RPMC8245

This is a wonderful enhancement to the thing currently being talked about.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Blue

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the centers mount to it.

FEATURES:
Heavy Duty Nylon Building and construction
Blue in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

INCLUDES:
2|2} Rear Blue A-Arms
One RPM Decal Sheet w/ 2|2} RPM Logos

REQUIRES:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Density: .31" (7.8mm)

This thing compliments the main item right here.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2|2} Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Frequently acquired with the thing that you are currently checking out.



This is the ST Racing Solidified Refined Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Sick of the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas car enough time, you more than likely have
currently experienced this problem. ST Racing Principles Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Kit will resolve this problem
at last. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat dealt with for increase in resilience, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

Frequently acquired with the thing that you are currently checking out.

Skid Plates, Front & Rear (Blue)

These are optional Front and Rear Skid Plates in Blue for the
Traxxas Electric Stampede.

FEATURES:
Constructed of plastic, blue in color
Changes stock black skid plates

INCLUDES:
Front and Rear Blue Skid Plates

This thing compliments the above talked about thing.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at rear of chassis to avoid car from flipping over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with mounting directions and
    hardware

REQUIRES:
Securing to rear of chassis