RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up requires no design modification for installation

CONSISTS OF:
2|2} Front A-Arms

REQUIRES:
Setup following the design handbook

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at best

REMARKS:
For the blue version of this part order RPMC8246

Want another excellent product to enhance the above discussed product?

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Sturdy Rear A-Arms for the
2WD Traxxas Slash Short Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Extremely long lasting

CONSISTS OF:
2|2} Sturdy Rear A-Arms

REQUIRES:
Setup on the car

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Also offered in Blue RPMC8472

This product is often purchased with the above discussed product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
2|2} Front bearing (center) providers
2|2} RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Want another excellent product to enhance the above discussed product?



This is the ST Racing Hardened Refined Steel Lock-nut Style Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas car enough time, you most likely have
currently experienced this problem. ST Racing Principles Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Set will resolve this problem
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for boost in sturdiness, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

This product compliments the main item right here.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two rear bearing (center) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at best point: 15.4mm (0.61")

This product compliments the main item right here.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Black

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the hubs mount to it.

FEATURES:
Sturdy Nylon Construction
Black in Color
Pre-Drilled Shock Installing Positions
For the Rear of the Electric Rustler and Electric Stampede

CONSISTS OF:
Two Rear Black A-Arms
One RPM Decal Sheet w/ Two RPM Brandings

REQUIRES:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Hub: 1.11" (28.25mm)
Density: .31" (7.8mm)