RPM Adjustable Front Body Mounts & Post, For Traxxas Slash/Rustler/N

This is the RPM Front Body Mount for the Slash, Stampede or Nitro Stampede.

FEATURES:
Black plastic building
Heavy-duty design

CONSISTS OF:
One front body install set, four 3x10mm flathead screws, directions
and decals

NEEDS:
Setup following the included directions

Right here is a wonderful product that numerous others have bought at the exact same time.

Adjustable Rear Body Mounts & Post, For Traxxas Slash/Rustler/Ni

This is the RPM Back Body Mount for the Slash, Stampede or Nitro Stampede.

FEATURES:
Black plastic building
Heavy-duty design

CONSISTS OF:
One back body install set, four 3x10mm flathead screws, directions
and decals

NEEDS:
Setup following the included directions

You will like this thing if you have the thing above pointed out.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up requires no design adjustment for installation

CONSISTS OF:
Two Front A-Arms

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

REMARKS:
For the blue version of this part order RPMC8246

This product compliments the above discussed product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two Front bearing (hub) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

This product compliments the above discussed product.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two rear bearing (hub) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

This is a amazing addition to the product currently being discussed.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Sturdy Back A-Arms for the
2WD Traxxas Slash Short Course Racing Truck.

FEATURES:
Nylon building
Black in color
Extremely long lasting

CONSISTS OF:
Two Sturdy Back A-Arms

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Likewise offered in Blue RPMC8472

Right here is an additional product that compliments the product being discussed.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated guarantee appropriate installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

Want an additional wonderful product to enhance the above stated product?

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Sturdy nylon reinforced plastic building
Uses all stock hardware (for mounting shocks etc.)

CONSISTS OF:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm