RPM Adjustable Front Body Mounts & Post, For Traxxas Slash/Rustler/N

This is the RPM Front Body Mount for the Slash, Stampede or Nitro Stampede.

FEATURES:
Black plastic building
Sturdy design

CONSISTS OF:
One front body install set, four 3x10mm flathead screws, guidelines
and decals

REQUIRES:
Installation following the consisted of guidelines

Below is a terrific product that many others have purchased the very same time.

Adjustable Rear Body Mounts & Post, For Traxxas Slash/Rustler/Ni

This is the RPM Back Body Mount for the Slash, Stampede or Nitro Stampede.

FEATURES:
Black plastic building
Sturdy design

CONSISTS OF:
One rear body install set, four 3x10mm flathead screws, guidelines
and decals

REQUIRES:
Installation following the consisted of guidelines

You will enjoy this item if you have the item previously pointed out.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, black in color
Direct fit hop-up requires no model modification for installation

CONSISTS OF:
Two Front A-Arms

REQUIRES:
Installation following the model handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

COMMENTS:
For the blue version of this part order RPMC8246

This product praises the above talked about product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

This product praises the above talked about product.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two rear bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

This is a wonderful enhancement to the product currently being talked about.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Sturdy Back A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon building
Black in color
Very resilient

CONSISTS OF:
Two Sturdy Back A-Arms

REQUIRES:
Installation on the vehicle

SPECS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

COMMENTS:
Also available in Blue RPMC8472

Below is one more product that praises the product being talked about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is exactly what the
guiding knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and left to guarantee appropriate installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and guiding knuckles

Want one more terrific product to match the above pointed out product?

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Sturdy nylon reinforced plastic building
Uses all stock hardware (for installing shocks etc.)

CONSISTS OF:
One rear shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm