ROBART 1/5 Scale Cub Main Gear

This is a Working Main Landing Gear Set by Robart
for a 1/5 Scale Cub

FEATURES:
Steel Building
Operating Sring Action using Rubber Washers

INCLUDES:
One Right Hand Frame
One Left Hand Frame
One Cross Brace
Two Lower Braces
Two Upper Braces
4 Mounting Brackets
4 Clevis Pins
Eight E-Clips
4 Rubber O-Rings
Two 8-32x3/16" Set Screws
Two 3/16" Axles
Eight 6-32x5/8" Slotted Round Head Screws
Eight 6-32" Blind Nuts
4 4-40x5/8" Cap Screws
Two 4-40x3/8" Cap Screws
6 4-40 Lock Nuts

REQUIRES:
1/5 Scale Aircraft with 5 1/8" Wide Fuselage

SPECS:
Mounting General
Length: 92.3mm (3.75") 104.8mm (4.125")
Width: 129.0mm (4 5/64") 381.0mm (15")

Height: n/a 108.0mm (4.25")
Tube Diameter: n/a 6.35mm (0.25")
Weight: n/a 230 grams (8.11 oz)