Rage RC Velocity 800 Bl Brushless Deep Vee Offshore Boat, Rtr

The Speed 800BL is propelled by brushless power that will have you flying across the water at adrenaline-pumping speeds of over 45MPH! Efficiency is provided by a brushless, water-cooled 1800kV motor, and utilized by a 60A water-cooled electronic speed control. This overseas spaceship includes a resilient uni-body ABS hull that shows up pre-painted with a unique matte yellow finish and bright, bold graphics that combine to provide the Speed a quick, aggressive look. The long lasting zinc/aluminum alloy propeller, anodized aluminum rudder, and stainless running hardware provide a rugged, yet sophisticated look that finishes the bundle, making the Speed 800 BL a great looking, high-performance boat that looks as fast on the consisted of screen stand as it does on the water. Must high speeds, aggressive turns, or rough seas cause the boat to turn or capsize, the special self-righting function automatically turns the boat right-side-up within a couple of seconds, allowing the chauffeur to bring the Speed back to dock safely.

The Speed 800 BL shows up 100% factory-assembled out of package with a 2-channel, 2.4 GHz radio system featuring totally proportional steering and throttle (forward-only), a 40 Kg/cm (550 oz./in.) waterproof servo, and even the AA batteries to power the transmitter. The only products needed for completion are the running batteries (one FOUR or 2 2S LiPo loads), and an ideal battery charger.

Key Functions:

• Efficient in speeds over 45MPH
• Fantastic exposure thanks to the bright yellow hull and vibrant trim plan
• Unique, factory-painted matte finish
• Resilient uni-body hull, precision-molded from state-of-the-art ABS
• Self-righting function eliminates issues over capsizing
• Powerful, water-cooled brushless 3536/1800KV motor
• 60A water-cooled ESC installed
• 40g waterproof guiding servo for accuracy guiding control
• Resilient prop made from Zinc/Aluminum alloy
• Stainless-steel trim tabs and turning fins
• Anodized aluminum rudder
• Can be operated on FOUR or 2 2S LiPo battery packs (not consisted of)
• Consists of 2.4GHz transmitter and 4 AA batteries

Products Required for Completion:

• 2S to FOUR LiPo-compatible battery charger
• Two VNR15008 TWO loads, or one FOUR battery pack w/XT60 ports (4000mAh minimum capacity)

Requirements:

• Hull Length: 28 1/2" (725mm)
• Hull Width: 8 1/4" (210mm)
• Overall Length: 32 1/2" (825mm)
• Hull Height: 5 1/2" (140mm)
• Weight w/o Battery: 49.5 oz. (1400g)
• Motor: 3540/2000kV
• Water-Cooled BL Motor
• ESC: 60A Water-Cooled Forward-Only
• Servo: 40 Kg/cm (550 oz./in.) Water Resistant Servo
• Transmitter: 2-Channel, 2.4GHz
• Receiver: 2-Channel, 2.4GHz

Velocity Rudder Assembly Handbook (Addendum)