Rage RC Velocity 800 Bl Brushless Deep Vee Offshore Boat, Rtr

The Velocity 800BL is propelled by brushless power that will have you flying across the water at adrenaline-pumping speeds of over 45MPH! Performance is provided by a brushless, water-cooled 1800kV motor, and utilized by a 60A water-cooled electronic speed control. This offshore spaceship includes a durable uni-body ABS hull that gets here pre-painted with a unique matte yellow surface and intense, strong graphics that combine to give the Velocity a quickly, aggressive appearance. The durable zinc/aluminum alloy propeller, anodized aluminum rudder, and stainless running hardware supply a rugged, yet classy appearance that completes the plan, making the Velocity 800 BL a terrific looking, high-performance boat that looks as fast on the included display screen stand as it does on the water. Must high speeds, aggressive turns, or rough seas trigger the boat to flip or capsize, the special self-righting feature immediately turns the boat right-side-up within a few seconds, permitting the motorist to bring the Velocity back to dock safely.

The Velocity 800 BL gets here 100% factory-assembled out of the box with a 2-channel, 2.4 GHz radio system featuring fully proportional steering and throttle (forward-only), a 40 Kg/cm (550 oz./in.) water resistant servo, and even the AA batteries to power the transmitter. The only items required for conclusion are the running batteries (one 4S or two 2S LiPo packs), and a suitable battery charger.

Key Features:

• Capable of speeds over 45MPH
• Great presence thanks to the intense yellow hull and vibrant trim scheme
• Distinct, factory-painted matte surface
• Resilient uni-body hull, precision-molded from top-quality ABS
• Self-righting feature removes concerns over capsizing
• Effective, water-cooled brushless 3536/1800KV motor
• 60A water-cooled ESC installed
• 40g water resistant guiding servo for accuracy guiding control
• Resilient prop made from Zinc/Aluminum alloy
• Stainless-steel trim tabs and turning fins
• Anodized aluminum rudder
• Can be run on 4S or two 2S LiPo battery packs (not included)
• Includes 2.4GHz transmitter and 4 AA batteries

Items Needed for Completion:

• 2S to 4S LiPo-compatible battery charger
• Two VNR15008 TWO packs, or one 4S battery pack w/XT60 adapters (4000mAh minimum capacity)

Specs:

• Hull Length: 28 1/2" (725mm)
• Hull Width: 8 1/4" (210mm)
• General Length: 32 1/2" (825mm)
• Hull Height: 5 1/2" (140mm)
• Weight w/o Battery: 49.5 oz. (1400g)
• Motor: 3540/2000kV
• Water-Cooled BL Motor
• ESC: 60A Water-Cooled Forward-Only
• Servo: 40 Kg/cm (550 oz./in.) Water Resistant Servo
• Transmitter: 2-Channel, 2.4GHz
• Receiver: 2-Channel, 2.4GHz

Velocity Rudder Assembly Handbook (Addendum)