Rage RC Velocity 800 Bl Brushless Deep Vee Offshore Boat, Rtr

The Velocity 800BL is propelled by brushless power that will have you flying across the water at adrenaline-pumping speeds of over 45MPH! Efficiency is provided by a brushless, water-cooled 1800kV motor, and harnessed by a 60A water-cooled electronic speed control. This overseas spaceship features a long lasting uni-body ABS hull that arrives pre-painted with a unique matte yellow finish and brilliant, strong graphics that combine to offer the Velocity a quickly, aggressive appearance. The resilient zinc/aluminum alloy prop, anodized aluminum rudder, and stainless running hardware provide a rugged, yet stylish look that completes the plan, making the Velocity 800 BL a terrific looking, high-performance boat that looks as fast on the consisted of display stand as it does on the water. Should high speeds, aggressive turns, or rough seas cause the boat to flip or capsize, the unique self-righting feature automatically turns the boat right-side-up within a few seconds, enabling the driver to bring the Velocity back to dock safely.

The Velocity 800 BL arrives 100% factory-assembled out of the box with a 2-channel, 2.4 GHz radio system featuring fully proportional steering and throttle (forward-only), a 40 Kg/cm (550 oz./in.) water resistant servo, and even the AA batteries to power the transmitter. The only products needed for completion are the running batteries (one FOUR or 2 2S LiPo packs), and an ideal battery charger.

Key Functions:

• Capable of speeds over 45MPH
• Terrific presence thanks to the brilliant yellow hull and dynamic trim scheme
• Special, factory-painted matte finish
• Durable uni-body hull, precision-molded from top-quality ABS
• Self-righting feature removes issues over capsizing
• Powerful, water-cooled brushless 3536/1800KV motor
• 60A water-cooled ESC installed
• 40g water resistant guiding servo for precision guiding control
• Durable prop made from Zinc/Aluminum alloy
• Stainless steel trim tabs and turning fins
• Anodized aluminum rudder
• Can be run on FOUR or 2 2S LiPo battery packs (not consisted of)
• Includes 2.4GHz transmitter and 4 AA batteries

Products Needed for Completion:

• 2S to FOUR LiPo-compatible battery charger
• Two VNR15008 2S packs, or one FOUR battery pack w/XT60 connectors (4000mAh minimum capability)

Specifications:

• Hull Length: 28 1/2" (725mm)
• Hull Width: 8 1/4" (210mm)
• Total Length: 32 1/2" (825mm)
• Hull Height: 5 1/2" (140mm)
• Weight w/o Battery: 49.5 oz. (1400g)
• Motor: 3540/2000kV
• Water-Cooled BL Motor
• ESC: 60A Water-Cooled Forward-Only
• Servo: 40 Kg/cm (550 oz./in.) Water Resistant Servo
• Transmitter: 2-Channel, 2.4GHz
• Receiver: 2-Channel, 2.4GHz

Velocity Rudder Assembly Manual (Addendum)