Rage RC Velocity 800 Bl Brushless Deep Vee Offshore Boat, Rtr

The Velocity 800BL is moved by brushless power that will have you flying across the water at adrenaline-pumping speeds of over 45MPH! Performance is delivered by a brushless, water-cooled 1800kV motor, and utilized by a 60A water-cooled electronic speed control. This overseas rocket ship features a durable uni-body ABS hull that shows up pre-painted with a unique matte yellow surface and bright, strong graphics that combine to provide the Velocity a fast, aggressive appearance. The long lasting zinc/aluminum alloy prop, anodized aluminum rudder, and stainless running hardware supply a rugged, yet stylish look that completes the package, making the Velocity 800 BL a terrific looking, high-performance boat that looks as fast on the consisted of display screen stand as it does on the water. Need to high speeds, aggressive turns, or rough seas cause the boat to flip or capsize, the distinct self-righting function instantly turns the boat right-side-up within a couple of seconds, allowing the motorist to bring the Velocity back to dock safely.

The Velocity 800 BL shows up 100% factory-assembled out of package with a 2-channel, 2.4 GHz radio system including fully proportional steering and throttle (forward-only), a 40 Kg/cm (550 oz./in.) waterproof servo, and even the AA batteries to power the transmitter. The only products required for conclusion are the running batteries (one FOUR or 2 2S LiPo packs), and an appropriate battery charger.

Key Features:

• Efficient in speeds over 45MPH
• Excellent visibility thanks to the bright yellow hull and dynamic trim plan
• Distinct, factory-painted matte surface
• Resilient uni-body hull, precision-molded from state-of-the-art ABS
• Self-righting function removes issues over capsizing
• Powerful, water-cooled brushless 3536/1800KV motor
• 60A water-cooled ESC set up
• 40g waterproof guiding servo for precision guiding control
• Resilient prop made from Zinc/Aluminum alloy
• Stainless-steel trim tabs and turning fins
• Anodized aluminum rudder
• Can be run on FOUR or 2 2S LiPo battery packs (not consisted of)
• Consists of 2.4GHz transmitter and 4 AA batteries

Products Needed for Completion:

• 2S to FOUR LiPo-compatible battery charger
• 2 VNR15008 TWO packs, or one FOUR battery pack w/XT60 adapters (4000mAh minimum capability)

Specifications:

• Hull Length: 28 1/2" (725mm)
• Hull Width: 8 1/4" (210mm)
• Overall Length: 32 1/2" (825mm)
• Hull Height: 5 1/2" (140mm)
• Weight w/o Battery: 49.5 oz. (1400g)
• Motor: 3540/2000kV
• Water-Cooled BL Motor
• ESC: 60A Water-Cooled Forward-Only
• Servo: 40 Kg/cm (550 oz./in.) Water Resistant Servo
• Transmitter: 2-Channel, 2.4GHz
• Receiver: 2-Channel, 2.4GHz

Velocity Rudder Assembly Manual (Addendum)