Rage RC Standard Size Metal Gear Analog Servo, Torque/Speed 142/.16 @6V

This is a conventional size, ball bearing, metal gear servo by Rage RC.

Specs
Size: 40.8 × 20.1 × 38 mm
Weight: 56 g
Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (6V)
Stall Torque: 9kg.cm/125.2oz.in(4.8V), 10.2kg.cm/141.9oz.in(6V)
Bearing Type: 2BB
Gear Type: Metal

Want one more great item to match the above pointed out item?

Superlift Superide 100mm Scale Shock Absorbers

This is a pair of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum building and construction with white painted surface
Internal spring design

CONSISTS OF:
Two Superlift Off-Road 100mm Racing Shocks

REQUIRES:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECIFICATIONS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
Total Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Size: 0.13" (3.4mm)
Stickers Requirements (Length): 1.26" (32mm)
Stickers Requirements (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

COMMENTS:
Superlift is a signed up hallmark of the Superlift Suspension
    Systems. The Superlift logo design is home of Superlift Suspension
    Systems.

Right here is a great item that many others have purchased the same time.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum building and construction
Created to fit the Yota II axles on the RC4WD Path Finder II

CONSISTS OF:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
4 M3 x 15mm Set Screws (Z-S0650)
4 M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECIFICATIONS:
Weight: 0.5oz (14g)

Get this item to boost the one you are reading around.



This is the optional RC4WD Chassis Mounted Steering Package with Panhard Bar
    for the Axial SCX-10 Honcho, Jeep Rubicon and Dingo.

FEATURES:
Converts guiding servo from axle mounted to chassis mounted with a
    panhard setup
CNC machined aluminum building and construction
Lightweight at only 2.64oz (75g)

CONSISTS OF:
Receiver Box Mount (Black)
Servo Mount (Black)
Panhard Bar Axle Mount (Black)
64mm Link (Gray)
69mm Link (Gray)
78mm Link (Gray)
5 M3 x 6mm BHCS (Black) (Z-S0651)
6 M3 x 8mm BHCS (Black) (Z-S0652)
Two M3 x 10mm BHCS (Black) (Z-S0653)
4 M3 x 12mm BHCS (Black) (Z-S0654)
Two M3 x 16mm BHCS (Black) (Z-S0656)
Two M3 x 20mm BHCS (Black) (Z-S0895)
5 M3 x 8mm FHCS (Black) (Z-S0649)
Two M3 x 14mm SHCS (Black) (Z-S1055)
Two M3 Short Bent Plastic Rod Ends (Z-S0402)
Two M3 Medium Straight Plastic Rod Ends (Z-S0399)
6 M3 Mini Plastic Rod Ends (Z-S0398)
Eight M3 x 15mm Threaded Rods (Z-S0650)

COMMENTS:
Consists of additional link for use on the Axial Dingo kit

Right here is a great item that many others have purchased the same time.

22 AWG X15cm Futaba Extension Leads with Hook on female

Details


RJX  22 AWG X15cm  Futaba Extension Leads with Hook on  female