ST Racing Concepts Aluminum Front Bulkhead, Gun Metal, For Traxxas Slash / Stampede

This is the ST Racing Ideas Aluminum Front Bulkhead
For the Traxxas Electric Stampede, Rustler, Outlaw, or Slash 1/10 automobiles
and Nitro Slash.

FEATURES:
Made of aluminum, anodized black in color

INCLUDES:
One bulkhead
2|2} M30x14mm Phillips head screws

SPECS:
Length: 2-7/8" (73mm)
Width: 1-3/32" (281mm)
Height: 1-17/32" (39mm)

COMMENTS:
This bulkhead can be set up on
Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede XL-5 2WD RTR w/7C Battery & Battery charger
Traxxas Rustler VXL 2.4GHz RTR
Traxxas Rustler XL-5 2WD RTR
Traxxas Outlaw VXL 2.4GHz RTR
Traxxas Outlaw Extreme Sports XL-5 RTR
Traxxas Slash 4X4 VXL TQi/2.4GHz RTR
Traxxas Slash 2WD TQi 2.4GHz RTR
Traxxas Slash 4X4 Ultimate VXL TQi RTR
Traxxas Slash F-150 SVT Raptor 2WD TQi
Traxxas Nitro Slash

Want another wonderful item to enhance the above stated item?

Battery Expansion Kit For Rustler/Stampede/Bandit

This is the Battery Growth Set
for the Traxxas Rustler, Outlaw and Stampede.

FEATURES:
Metal construction
Permits installation of taller multi-cell battery loads

INCLUDES:
Foam, battery posts and screws

REQUIRES:
Setup on the automobile

SPECS:
Height: 1.41" (36mm)

COMMENTS:
Battery & receiver hold down is required for the Stampede

This item praises the above discussed item.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

This item praises the main item below.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Get this item to improve the one you read about.

Heavy Duty Rod Ends, Black, (12Pcs)

These strong rod ends are made from injection formed black nylon and fit
Associated or Losi .168 suspension balls.

Here is a wonderful item that numerous others have actually purchased the exact same time.

Fr Bumper/Skid Blk Nitro Slash

    This is the optional RPM Front Bumper and Skid Plate
for usage on the Traxxas Slash 2WD Short Course Racing Truck.

FEATURES:
Plastic construction
Black in color

INCLUDES:
One Front Bumper and Skid Plate

REQUIRES:
Setup on the automobile

COMMENTS:
Also available in Blue (RPMC0953)
Chrome (RPMC0954)

This item praises the above discussed item.

Aluminum Caster Blocks, Gun Metal, For Traxxas Slash / Stampede

This item praises the above discussed item.

Aluminum Oversized Front Knuckles W/Bearings, Gun Metal, For Tra

These are the Gunmetal Aluminum Front Knuckles from ST Racing
for the Traxxas Electric Slash 2WD, Stampede, Rustler, Outlaw
and Nitro Slash.

FEATURES:
Gunmetal in color

INCLUDES:
2|2} Gunmetal Aluminum Front Knuckles
Four Ball Bearings

This item is regularly acquired with the above stated item.



This is the ST Racing Hardened Polished Steel Lock-nut Design Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas automobile long enough, you most likely have
already experienced this issue. ST Racing Ideas Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Set will resolve this issue
at last. CNC Machined from premium 12.9 grade carbon
steel, that is then heat treated for boost in sturdiness, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts