ST Racing Concepts Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Ideas Refined Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building

INCLUDES:
Left and Right King Pins for front suspension

Often gotten with the product that you are currently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is what the
steering knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and left to guarantee right installation

INCLUDES:
2|2} RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

Want an additional excellent product to compliment the above discussed product?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2|2} Front bearing (hub) providers
2|2} RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Want an additional excellent product to compliment the above discussed product?

CNC Mach Alum Caster Blocks Stampede/Rustler/Sl

Here is a excellent product that numerous others have purchased the same time.

Aluminum Caster Blocks, Red, For Traxxas Slash / Stampede / Rust

Here is a excellent product that numerous others have purchased the same time.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2|2} rear bearing (hub) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at best point: 15.4mm (0.61")

This product is often gotten with the above discussed product.



This is the ST Racing Hardened Refined Steel Lock-nut Design Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas car enough time, you most likely have
already experienced this problem. ST Racing Ideas Heat Treated
Refined Steel Lock-Nut Design Hinge-Pin Set will resolve this problem
at last. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat dealt with for increase in sturdiness, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

The below product likewise pairs actually well with the product being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)