ST Racing Concepts Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Principles Polished Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building

INCLUDES:
Left and Right King Pins for front suspension

Often gotten with the thing that you are presently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated insure right installation

INCLUDES:
2 RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles

Want an additional excellent thing to compliment the above stated thing?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

Want an additional excellent thing to compliment the above stated thing?

CNC Mach Alum Caster Blocks Stampede/Rustler/Sl

Below is a excellent thing that lots of others have bought at the very same time.

Aluminum Caster Blocks, Red, For Traxxas Slash / Stampede / Rust

Below is a excellent thing that lots of others have bought at the very same time.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 rear bearing (center) providers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

This thing is regularly gotten with the above stated thing.



This is the ST Racing Solidified Polished Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas vehicle long enough, you most likely have
already experienced this problem. ST Racing Principles Heat Treated
Polished Steel Lock-Nut Style Hinge-Pin Kit will fix this problem
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for increase in durability, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

The listed below thing likewise pairs actually well with the thing being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)