ST Racing Concepts Alum Front Bulkhead w/Hardware Stampede/Rustler

This is the ST Racing Concepts Aluminum Front Bulkhead
For the Traxxas Electric Stampede, Rustler, Outlaw, or Slash 1/10 cars
and Nitro Slash.

FEATURES:
Made from aluminum, anodized silver in color

INCLUDES:
One bulkhead
Two M30x14mm Phillips head screws

SPECS:
Length: 2-7/8" (73mm)
Width: 1-3/32" (281mm)
Height: 1-17/32" (39mm)

COMMENTS:
This bulkhead can be installed on
Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede XL-5 2WD RTR w/7C Battery & Charger
Traxxas Rustler VXL 2.4GHz RTR
Traxxas Rustler XL-5 2WD RTR
Traxxas Outlaw VXL 2.4GHz RTR
Traxxas Outlaw Extreme Sports XL-5 RTR
Traxxas Slash 4X4 VXL TQi/2.4GHz RTR
Traxxas Slash 2WD TQi 2.4GHz RTR
Traxxas Slash 4X4 Ultimate VXL TQi RTR
Traxxas Slash F-150 SVT Raptor 2WD TQi
Traxxas Nitro Slash

This item is often bought with the above stated item.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up requires no design modification for installation

INCLUDES:
Two Front A-Arms

REQUIRES:
Setup following the design manual

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at largest

COMMENTS:
For the blue version of this part order RPMC8246

Here is a wonderful item that numerous others have actually purchased the exact same time.



This is the ST Racing Solidified Sleek Steel Lock-nut Design Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas car long enough, you probably have
currently experienced this issue. ST Racing Concepts Heat Treated
Sleek Steel Lock-Nut Design Hinge-Pin Kit will resolve this issue
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for boost in toughness, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

The listed below item additionally sets really well with the item being reviewed.



This is the optional Pro-Line PRO-2 Front Hinge Pin Brace
for the 1/10 scale 2wd Traxxas Slash.

FEATURES:
Hard anodized machined aluminum building and construction
Changes stock fiberglass hinge pin brace

INCLUDES:
Pro-Line PRO-2 Front Hinge Pin Brace

Get this item to boost the one you read about.



This is the ST Racing Silver Aluminum Rear Hub Carrier
for the Traxxas Slash 2WD, Stampede, Rustler and Bandit.

FEATURES:
Silver in color

INCLUDES:
One Silver Aluminum Rear Hub Carrier

Want another wonderful item to match the above stated item?

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Heavy Duty Rear A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Really long lasting

INCLUDES:
Two Heavy Duty Rear A-Arms

REQUIRES:
Setup on the car

SPECS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

COMMENTS:
Likewise available in Blue RPMC8472