Racers Edge 4" Black Tie Wraps (30)

This is a pack of thirty Racers Edge 4" long black zip tie wraps. Zip tie wraps make an awesome addition to your pit box, as you can use them to protect wires to your chassis, produce pull loops for your fuel tank and perform quick repairs on the fly throughout a race to your car body!

This product compliments the above discussed product.

7 1/2 In Black Tie Wraps (25)

This is a pack of twenty five Racers Edge 7.5" long black zip tie wraps. Zip tie wraps make an awesome addition to your pit box, as you can use them to protect wires to your chassis, produce pull loops for your fuel tank and perform quick repairs on the fly throughout a race to your car body!

You will certainly like this thing if you have the thing above stated.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is best for all electronic applications.

Get this product to enhance the one you are reading about.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Provides a safe connection for battery and motor connections

CONSISTS OF:
Two 2-Pin Male Ultra Plug
Four short pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

This product compliments the main item below.



These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Provides a safe connection for battery and motor connections on
    R/C vehicles

CONSISTS OF:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    diminish tubing

NEEDS:
Soldering ports onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001

Regularly purchased with the product that you are presently checking out.



This is a Tube of JB Weld Medium Threadlocker.

FEATURES:
Temperature level resistant to 300°F
Perfect for 1/4 - 1" fasteners
OEM authorized

CONSISTS OF:
6mL tube of threadlocker

SPECIFICATIONS:
Weight: .20 fl oz. (6mL)

You will certainly like this thing if you have the thing above stated.

Servo line Color Black and Red

Looking to clean up the look of your helicopter, airplane of RC car & secure your servo lines from chaffing? Servo Line Covering is a simple way to secure your servo wires, including a clean, visual aim to your RC maker, and can be set up in a matter of minutes. Select from our interesting line of different colors to sack a whole new aim to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Install Servo Line Covering?

Simply eliminate your servo(s) from the receiver, measure the length of covering you will require for your servo wire(s), and open one end of the covering and place the servo terminal within. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and slowly inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off a suitable sized piece of the included heat diminish, and slide it over the covering till it is flush with the servo itself. Heat the diminish wrap with a soldering iron or heat weapon to diminish it down around the covering, thus offering you a flush, tight fit over the previously frayed servo covering. Do the very same with the end of your servo wire, bewaring to leave the terminal bare so it can quickly connected into your receiver. Also, make sure to remember of the servo wire polarity if you cover the complete wire – this will make sure that you will know what instructions to plug your servo terminal into your receiver.